Sale!

explore-our-neptvn-pro-400-inflatable-fishing-boat-neptvn-selection-with-low-costs_0.png

explore-our-neptvn-pro-400-inflatable-fishing-boat-neptvn-selection-with-low-costs_1.png

NEPTVN Pro 400 Inflatable Fishing Boat NEPTVN

Original price was: $ 4.499.Current price is: $ 1.125.

SKU: us_6840310890630 Category: Powered Fishing Kayaks Tags: 13-14ft, 75-100lbs, inflatableboat, inflatablekayak, instock, lakefishing, motorized, neptvn, neptvnoption, productfeed, solo

Description
shopping

NEPTVN Pro 400

It’s not just a sexy shape, we design the most efficient shape in the market: the progressive thinning of the tubular near the bow makes this boat so aerodynamic to exceed the speed of 25 mph with just a 10 hp outboard. This means you will get the best performance ever saving a lot of money on everything you will buy: boat, fuel, engine, and transport.

The tubular is divided into 3 air chambers: 2 for the stern and 1 for the bow, considering also another air chamber for the dropstitch floor the hull is divided into 4 air chambers. You must feel super safe because NEPTVN PRO 400 is virtually unsinkable. When it brakes waves divide into 3 parts: 2 outside the keel and 1 channeled inside the hull; this allows for reduced friction on water, increase stability and maximize speed.

NEPTVN Pro 400 Specs

Length: 13′ (400cm)
Width: 47″ (120 cm)
Weight: 77 lbs (35kg)
Max Capacity: 881 lbs (400kg)
Max Outboard: 8 Kw /10 hp
Tube D: 40 – 17 cm
Dimensions: 33.5″ x 25.6″ x 17.7″ Deflated (85 x 65 x 45 cm)
Included Accessories: A super efficient HP1 hand pump with 2 different speeds, you won’t believe how it will make fast inflation. A repair kit with Valmex PVC patches and the C7 valve key. A smart water-repellent transport bag for the most comfortable transport you ever try. A modular double-use paddle: with this accessory, you can turn your boat into a paddle board or a kayak in just a few seconds.
Outboard motor sold separately

NEPTVN Pro 400 Features

INNOVATIVE REINFORCEMENTS: Along the entire boat perimeter runs a super strong rubber reinforcement with a smart profile. In case of impact, the stress is discharged directly on this reinforcement without compromising the tubular. All the logos are made of this material as well, cool design and functionality are the keywords. The hull bottom is reinforced with a super strong and knurled rubber: when you are on the water this ensures a greater grip in veer, when you are out of the water you could drag the boat on rocks and it will not be damaged at all.
DROPSTITCH TECHNOLOGY: When you ll try the rigidity of NEPTVN PRO 400 floor you won’t believe it’s inflatable. That’s because we use a super high-pressure 1000 D PVC dropstitch, with a max pressure of 17 psi. This floor is insertable and removable from the hull in seconds or could stay always inserted, thanks to this innovative technology the entire hull has the same transportability of a paddle board or a belly boat.

HULL PREMIUM MATERIALS: We selected the best materials to make the most performing, lightest, strong, and fast boat in the world. We don’t use the standard cheap PVC used for common inflatable boats, we use the MEHLER TEXNOLOGIES VALMEX® FABRIC 0.9mm 1100 dtex, made in Germany. Several layers of PVC are combined with a Polyester base fabric of high strength, These layers give flexibility, elasticity, airtightness, and resistance against mechanical damage. This means Your NEPTVN PRO 400 is resistant to abrasion, UV rays, and weather is dirt-repellent and insensitive to high-temperature conditions. Every PVC parts of the NEPTVN PRO 400 are not simply glued, is HOT WELDED with a process that makes them structurally eternal.
NO SLIP PVC PADS: Water-repellent and non slip PVC pads, with a super cool beehive design, allow the entire boat to be more efficient and safe. 4 pads on tubular: 2 pads near the leaning post, they are used for switch stern to bow safety or to sit if you choose to remove the structure; 2 pads on the stern to better fix the casting structure or to have a better grip if you want to put your feet on the tubular. The dropstitch floor is completely covered by the beehive EVA instead, to make it stronger, harder, and safer.
INOX D-RINGS: On the NEPTVN PRO 400 hull are welded 14 eternal D-RINGS: 5 big D-rings on the tubular makes various spot for anchoring the boat, 9 small D-rings on the dropstitch floor for fixing the leaning post and the stern casting structure in a modular way. Every D-rings are made of INOX steel so you can be sure their durability is eternal.
RAILBLAZA RIBPORTS: Two of these super smart inserts are compatible with rod holders, fish finder mounts, platforms, illuminate I360, and every product of railblaza company. You have only to choose what accessories you need for your boat and these mounts can hold them all with just a fast click.

C7 STYLE AIR VALVES – RELIEF AIR VALVES: Super high seal valves on NEPTVN, this type of air valve is used for military applications because of their safety, strength, and impermeability. The valve twister and the body are connected by an O-ring instead the common nylon line, so when you screw the twister on the body the entire valve becomes 100% bombproof. Inside the valve’s body there’s a strong air regulator, remember to check the right position before inflating and deflating to have the best performance possible. 3 valves on the tubular and one on the dropstitch floor allow the faster inflation and deflation ever of a complete hull. In 4 minutes your boat is inflated, in 2 minutes is deflated and you are ready before anyone without any effort in transport and setting. 3 premium relief valves on the tubular makes the pressure of the boat always monitored, you never have to worry about pressure increase or decrease.

REINFORCED HANDLES: 7 handles on the tubular made of military-grade PVC, hot welded and stitched: whether you want to use them to have a secure grip during speed or to transport the boat in and out of the water, these strong handles make everything comfortable and safe.
SUPERIOR TRANSOM: Super strong transom reinforced with two plates and fixed on the tubular with specific rubber protection, it can virtually hold any type of outboard. To avoid the problem of the water inside the boat, for example in case of rain, we add a smart water drainer: this trick lets out instantly all the water that comes into the boat just by pulling a lever.
CASTING STRUCTURE: A reinforced premium aluminum plate with 2 welded inclined rod holders and holes to insert pliers, scissors, and various accessories. 2 holes on each side to connect the casting structures to the floor D-rings using strong fixing belts. This structure is completely powder coated and covered by the hive design with no slip EVA pad, to improve grip and stability while you are fishing standing on it.

BEST PORTABILITY: NEPTVN PRO 400 is a 4 m boat with big aluminum structures and yes, it can fit in a small place. Take it wherever you go, put it on the top or in the trunk of your car, and travel without the price and effort of having a truck.
LEANING POST: In the middle of the boat is placed this modular structure composed of 4 parts: A seat with 6 welded rod holders, holes for insert accessories, and supports for the other 3 parts. 2 removable legs. A handle is used during speed or used as the back of the structure for the angler who seat there. You can fix the leaning post on the floor using 6 D-rings to change 3 positions and make 3 different configurations of the boat. Also, this structure is completely powder coated, the seat and the back are accessorized by 2 removable, comfortable, and water-repellent cushions. On The back of the leaning post, there are 8 holes for smart storing your hooks, and on the seat triangular holes for scissors and pliers. This structure always maintains tidy your boat.

NEPTVN Configurations

KAYAK CONFIGURATION: Fix the structure on the first 2 D-rings: now the leaning post is exactly in the middle of the boat and you can paddle it like a kayak without any effort.

ANGLERS CONFIGURATION: Fix the structure on the second 2 D-rings: now you have the same distances for the bow and stern from the leaning post, so 2 anglers can fish perfectly having the same space on the boat.

SOLO CONFIGURATION: Fix the structure on the last 2 D-rings: when you are fishing alone with this configuration you have really a lot of space to move comfortably on the boat without waive to have a leaning post where you can mount all your tackle.

Your Satisfaction with NEPTVN is Guaranteed:

Free Shipping & No Sales Tax in the U.S.
Exclusive Dealer in the USA

Professionally packed and fast shipping

Due to our long-term partnership with UPS, FedEx, DHL and a variety of other top global carriers we are able to offer a variety of shipping options. Our warehouse personnel will pack all goods to our exacting requirements. Your items will go through an exhaustive examination before they will be properly packaged prior to being sent out. Everyday, we send to thousands of customers in different countries. This demonstrates our dedication to become the biggest online retailer in the world. The warehouses are located in Europe as much as they are in USA.

Note that orders containing multiple items are processed according to the specific item.

Before shipping We will inspect thoroughly the items you have ordered. Today, most orders will be delivered within 48 hours. The delivery time is between 3-7 working days.

Returns

The stock market is always changing. It is not managed entirely by us since we are involved with multiple organizations, such as the factory and the storage. Stocks are subject to change at any moment. Be aware that your order may be out of stock after your order has been made.

Our policy is for 30 days. If you have passed 30 days in the past since you purchased however, we're unable to give you a return or exchange.

The item you purchase must be in its original packaging and not be used. It must also be returned in the original packaging.