Bixpy J-2 Outboard Motor Kit for Kayaks and Paddleboards
The Bixpy J-2 Outboard Kit is Bixpy’s second major iteration to its, now famous, jet propulsion system that has motorized thousands of kayaks, paddle boards, dinghies, float-tubes and all kinds of personal water craft over the last 4 years. This kit combines the awesome power of the new Bixpy J-2 Motor with the finely tuned, waterproof, wireless PP-378 Outboard Battery to power virtually any personal watercraft on the market.
Whether you want to motorize your kayak, canoe, paddleboard, float-tube, dinghy, inflatable pack-raft, or any number of other small watercraft, the Bixpy Outboard Kit is your answer. There is nothing else on the market made so specifically to give water enthusiasts an ultra-light and super adaptable package to power their boats.
In addition to the motor and battery, you have a large array of Bixpy’s Plug & Play Bixpy Adapters to choose from to make installation on hundreds of small and large brand name boats a snap! The Bixpy Outboard Kit enables you to stay out longer, explore new waters, fish more, troll for hours or just get home effortlessly at the end of a long tiring day on the water or when the weather turns on you and you need an extra push to get you back.
Kit Includes:
- Bixpy J-2 PowerShroud™ Motor with Built-in Adapter
- Bixpy Outboard Battery (378 Wh)
- Wireless Remote Control
- Magnetic kill switch with floating leash
- Universal 100 – 240V Wall Charger
- Allen key to open propeller shroud for cleaning and repairs
- 5ml tube of di-electric grease
- Quick Start User Manual
- Bixpy Vinyl Decal
Bixpy Outboard Jet Specs
- Weight: 9 lbs
- Motor Size: L: 11.06″| W: 3.15″| H: 3.59″| H (including the attachment adapter ): 5.59″
- Battery size: L 11.3″ (28 cm) W 8.75″ (22 cm) H 3.2″ (8 cm)
- Motor output: equivalent to 32lb of output
- Battery Type: Lithium-ion rechargeable
- Recharge Time: 5.5 hours
- Running Time: ~80 minutes at top speed and up to 12 hours at slower speeds
Bixpy Outboard Jet Features
- Runs for approximately 80 minutes at top speed and up to 12 hours at slower speeds
- Ultralight setup (weighs just 9 lb including battery and motor)
- Operates via wireless remote control with 12 forward speeds and 3 reverse speeds
- Waterproof and dirt-proof with corrosion-resistant components
- Outboard Power Pack and remote control floats in case of accidental slippage
- Built in wire harness with 1.5m (5′) power cable included for hassle free connection to your adapter
Bixpy Adapter Options
Flip & Lock Fin Adapter
If your paddle board or kayak has a Flip & Lock Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes. If you already own a Bixpy J-1 or J-2 Motor and standard attachment, and would like to get a Flip & Lock fin, this is what you’ll need.
Adapter Features:
- Flip & Lock Fin Adapter
- Locking tab and leash
- Water-proof, dirt-proof and corrosion resistant components
Flat Surface Bracket
The Flat Surface Bracket allows you to take your DIY projects to a new level. Using this piece, you can mount your Bixpy Motor to virtually any flat surface you can imagine. All you need is 4 bolts or screws! This is a great tool for pod mounts on kayaks or a variety of other applications where you need to vertically attach the Bixpy Motor to a flat surface. If you have a J-2 Motor, this adapter will simply attach directly to your J-2 motor. J-1 Motors will require a Standard Attachment to adapt to the motor before attaching this adapter.
Compatible with both J-1 and J-2 Motors
Hobie® Mirage, Vibe X-Drive, Pelican HD, Lightening
No Drilling. No Hassle. This Pedal Drive Adapter clicks into the foot pedal drive of most fin pedal kayaks to replace your pedals with a mighty motor. This simple swap allows you to take your kayaking to the next level with clean electric power. Now fits more kayaks including all roto-molded Hobie® kayaks, Inflatable Hobie® kayaks, Vibe Kayaks, Pelican Kayaks and Lightening Kayaks. Please note that this adapter does not fit the new Hobie® MirageDrive 360.
Comaptible with J-2 motors
Adapter Features:
- Pedal Drive Adapter
- Bixpy Propeller Housing with reduced width for a better fit (required for most kayaks)
- Cable length from motor connector end to battery connector end (including blue pipe): 6 feet (1.85 m)
- Thruster draft: 12″ (30.5 cm) from bottom of kayak to bottom of motor
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for salt water or fresh water use
DIY Fin Adapter for Inflatables
If you own an inflatable kayak or an inflatable stand up paddleboard (or inflatable anything) and would like to motorize it, you now have the perfect companion: the DIY Fin Adapter for Inflatables. For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you’ll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box.
This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing to. The fin box material is PVC. So if you’re glueing to a PVC surface, you can use a PVC to PVC adhesive. If you’re gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive.
Adapter Features:
- Compatible J-2 Motor Only
- Inflatable Fin Box – Adapter
- Bixpy Slide & Lock Fin Adapter
- All hardware required
- Motor draft: 6″ (15 cm)
- Water-proof, dirt-proof and corrosion resistant housing and components for salt water or fresh water use
ThruHull™ Pod Adapter – Bonafide Kayaks
No Drilling. No holes. No hassle! The ThruHull™ Pod Adapter for Bonafide Kayaks clips into the Dry Pod opening of your Bonafide kayak in seconds. The adapter comes with the original Bonafide Dry Pod, allowing you to store and quickly access your gear or personal items. The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the Dry Pod and can continue to use it for its intended purpose as you motor in your Bonafide kayak. This adapter also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
Compatible with J-2 Motors
Adapter Features:
- ThruHull™ Pod Adapter for Bonafide Kayaks
- Bixpy Propeller Housing with reduced width for a better fit
- Quick and easy installation
- Works with SS107 & SS127
- Sealed to keep the pod dry
- Weighs less than 4lbs
- Original Bonafide Dry Pod
- Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for salt water or fresh water use
Power Pole Adapter
The Power Pole WillFit™ Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole adapter slot. If your kayak accommodates a Micro Anchor Power Pole, you can simply screw this adapter onto your Power Pole in seconds – no tools required! If your kayak is Power Pole ready, but requires a special mounting plate (i.e. some Hobie® Pro Anglers, Wilderness Atak, Native Propel, etc.) you will need that mounting plate from your kayak manufacturer to make installation easier.
If your kayak does not have a power pole mount, this is still an excellent, stable option for mounting a Bixpy Motor to your kayak as long as you have a fairly flat area in the rear of your kayak to accommodate the adapter’s foot print.
Pole Steering as shown in some of the pictures is NOT included in this adapter kit and can be purchased separately.
Compatible with J-2 Motors
Adapter Features:
- Bixpy Power Pole Adapter
- All hardware required to attach to Power Pole ready kayaks
- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 9.5″ to 14.5″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for saltwater or fresh water use
Slide & Lock Fin
If your paddle board or kayak has a Slide & Lock (sometimes called a Standard Fin Plate), this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes. If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a Slide & Lock fin, this is what you’ll need.
Compatible with J-1 and J-2 Motors
Adapter Features:
- Flip & Lock Fin Adapter
- Locking tab and leash
- Water-proof, dirt-proof and corrosion resistant components
Hobie® Twist & Stow Rudder Adapter
No holes, no kayak modifications and simple Plug and Play installation! The Hobie® Twist & Stow Rudder Adapter replaces your Hobie® rudder with a Bixpy Rudder and enable you to attache your J-2 Motor to your kayak’s rudder assembly. Steering is done using your Hobie® steering system.
Please note, this rudder adapter is ONLY compatible with Hobie® Twist and Stow rudders. That includes: Hobie® Sport Kayaks, Hobie® Revolution Kayaks, Hobie® Outbacks (pre 2019) and Hobie® Oasis Kayaks.
Not recommended on Inflatable Hobie® Kayaks and this adapter won’t fit Hobie® Pro Angler, Passport, Compass, 2019+ Outbacks and Island Series kayaks.
Compatible with J-2 Motors
Adapter Features:
- Hobie® Twist & Stow Rudder blade
- All hardware required will be on your existing Hobie Rudder
- Water-proof, dirt-proof and corrosion resistant housing and components
ThruHull™ Pod Adapter – Feelfree Kayaks
No Drilling. No holes. No hassle! The ThruHull™ Pod Adapter for Feelfree Kayaks clips into the pod opening of your Feelfree kayak in seconds. The adapter comes with the original Feelfree pod, allowing you to store and quickly access your gear or personal items. The Bixpy Motor mounts on the bottom with only a backing plate inside the pod so you lose minimal space in the pod and can continue to use it for its intended purpose as you motor in your FeelFree kayak. This ThruHull™ Pod Adapter for Feelfree Kayaks also features a motor shield that protects the motor in case of a light impact.
Please note: installation of a motor on the pod will not leave enough space for installing a transducer as intended.
Compatible with J-2 Motors
Adapter Features:
- ThruHull™ Pod Adapter for FeelFree Kayaks
- Bixpy Propeller Housing with reduced width for a better fit
- Quick and easy installation
- Works with FeelFree Lure, Moken, Dorado, Predador
- Sealed to keep the pod dry
- Weighs less than 4lbs
- Original Feelfree Pod
- Thruster draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for salt water or fresh water use
Transom Adapter
With the Transom Adapter, you can attach your Bixpy Motor to virtually any watercraft with a flat vertical mounting surface in seconds. This includes most dinghies, some kayaks, personal pontoons and a variety of other watercraft. The aluminum pipe will adjust to accommodate virtually any depth to meet your needs.
This kit also includes a complete steering mechanism that will allow you to steer the motor for full control of your kayak.
Compatible with J-2 Motors
Adapter Features:
- Transom WillFit™ Adapter
- All hardware required to attach to dinghies, kayaks, personal pontoons and a variety of other watercraft
- Tiller Steering Handle (2 sizes – 12″ and 24″ included)
- One Rubber grip for tiller handle
- Fits virtually any transom plate
- Adjustable depth
- Quick release disassembly
- Adjustable trim
- Super sturdy construction
- Attaches to virtually any watercraft with a flat vertical mounting surface
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for salt water or fresh water use
- Length of horizontal blue pipe: 31 inches (79 cm)
Universal Kayak Adapter
With the Universal Kayak Adapter, you can attach your Bixpy J-2 Motor to virtually any kayak, canoe or small watercraft. The aluminum pipes will adjust to accommodate virtually any length and configuration, and the mechanism includes an ingenious adjustment arm to accommodate a wide variety of slopes in the back of various watercraft.
As every kayak is slightly different in shape and configuration, you will have to do a little bit of installation with this adapter, but rest assured, this adapter ships complete with all the nuts and bolts you’ll need to get the job done. This is a more complex adapter, requiring higher levels of DIY ability, so it’s only recommended if none of our other Adapters fit your kayak and you’re comfortable taking on the task of installation or have access to a professional installer.
Compatible with J-2 Motors
Adapter Features:
- Universal Kayak & Canoe Adapter
- All hardware required to attach to kayaks and canoes
- Attaches to virtually any kayak or canoe with adjustable hardware
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for salt water or fresh water use
Universal Rudder Adapter
The Vibe Bixpy-Ready Gravity Rudder is the first rudder in the market specifically designed to accept a motor as an option. The bottom portion of the rudder unscrews in seconds to allow you to attache your J-2 Motor directly onto the rudder.
The Vibe Bixpy-Ready Gravity Rudder offers a molded 10mm stainless steel pin that offers easy installation and not only fits all Vibe kayaks but can replace most other manufacturer rudders in seconds! It also offers a robust double hinged, 90° Slide & Stow mechanism that gets the rudder completely out of the water in a heartbeat!
The Vibe Bixpy-Ready Gravity Rudder also features a gravity driven locking mechanism that allows the rudder to lock into place when motorized in forward or reverse. However, since the locking only occurs with gravity, the rudder easily “unlocks” and pops up to protect your motor and rudder in shallow water.
Compatible with J-2 Motors
Adapter Features:
- Vibe Bixpy-Ready Gravity Rudder
- Bixpy Clam Cleat
- Pull up rope
- Mounts into any standard rudder 10mm pin hole
- Gravity deployment system
- 90° quick Slide & Stow feature
- Gravity “Lock-down” mechanism for reverse speeds
- 18in. x 4in. rudder blade
- Kick up feature for shallow water and hazards
- Removable cap for mounting Bixpy Jet Motor
Hobie® Pro Angler / Compass / Outback Power Pole Adapter
The Hobie® Pro Angler / Compass / Outback† Adapter allows you to quickly and easily add a Bixpy Motor to your kayak using your standard Micro Power Pole hole adapter slot. 2019 or newer Hobie® Outbacks already have the screw inserts to accommodate this adapter – so all you need is the adapter. However, for Pro Angler and Compass kayaks, you will need to purchase a Hobie Power Pole Plate before installing this adapter.
Compatible with J-2 Motors
Adapter Features:
- Hobie® Pro Angler / Compass WillFit™ Power Pole Adapter
- All hardware required to attach to Power Pole ready kayaks
- Pole Steering piece illustrated NOT included
- Hobie® Compass Power Pole Mounting Plate & Hobie® Pro Angler Power Pole Mounting Plate NOT included
- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 8″ to 13″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for salt water or fresh water use
Hobie® Pro Angler Adapter with Hobie® Power Pole Plate
The Hobie® Pro Angler Power Pole Adapter allows you to quickly and easily add a Bixpy J-2 Motor to your kayak using your standard Micro Power Pole hole adapter slot. This adapter comes with the Hobie® Pro Angler Power Pole Mounting Bracket Kit, which fits both the Pro Angler 12 and 14 and is designed to allow a Power Pole Micro Anchor or the Bixpy Power Pole Adapter to be installed on the rear of your kayak.
Compatible with J-2 Motors
If you already have a Power Pole Plate for your Hobie kayak, you can simply purchase the Hobie® Pro Angler / Compass / Outback Power Pole Adapter
Adapter Features:
- Hobie® Pro Angler / Compass WillFit™ Power Pole Adapter
- Hobie® Pro Angler Power Pole Mounting Plate with all hardware from Hobie®
- All hardware required to attach to Power Pole ready kayaks
- Pole Steering piece illustrated NOT included
- Quick release for getting on and off the water quickly
- Hinge that allows the motor to lift completely out of the water
- 8″ to 13″ from bottom of plate to bottom of motor – it is recommended that the bottom of your motor be about 3″ to 5″ below the waterline and more in choppy water as necessary
- 270° of rotational trim – adapter ships with set screws in place. To achieve steering, set screws must be removed.
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for salt water or fresh water use
US Fin Adapter
If your paddle board or kayak has a US Fin Box, this Adapter will allow you to attach the J-2 Motor onto your Paddle Board or Kayak within minutes. If you already own a Bixpy J-1 Motor and standard attachment, and would like to get a new US SUP fin, this is what you’ll need.
Compatible with J-1 and J-2 Motors
Adapter Features:
- Bixpy US SUP Fin
- All stainless steel hardware required to attach the fin to your fin box
- Water-proof, dirt-proof and corrosion resistant components
- Marine grade stainless steel components for salt water or fresh water use
DIY ThruHull™ POD Adapter
The DIY (Do It Yourself) ThruHull™ POD Adapter is the perfect DIY Adapter for the do it yourselfer looking to install the Bixpy Motor on a Dry Pod or to the flat surface of virtually anything at all.
Compatible with J-1 and J-2 Motors
Adapter Features:
- DIY (Do It Yourself) ThruHull™ POD Adapter kit with all hardware
- Sturdy and stable adapter with all parts included for easy installation
- Seales to keep the pod dry
- Weighs less than 2 lbs
- Dry pod not included
- Motor shield to protect the motor in case of accidental collision with bottom
- Motor draft: 10″ (25 cm) from bottom of kayak to bottom of motor
- Water-proof, dirt-proof and corrosion resistant housing and components
- Marine grade stainless steel components for salt water or fresh water use
Professionally packed and fast shipping
Due to our long-term partnership with UPS, FedEx, DHL and a variety of other top global carriers we are able to offer a variety of shipping options. Our warehouse personnel will pack all goods to our exacting requirements. Your items will go through an exhaustive examination before they will be properly packaged prior to being sent out. Everyday, we send to thousands of customers in different countries. This demonstrates our dedication to become the biggest online retailer in the world. The warehouses are located in Europe as much as they are in USA.
Note that orders containing multiple items are processed according to the specific item.
Before shipping We will inspect thoroughly the items you have ordered. Today, most orders will be delivered within 48 hours. The delivery time is between 3-7 working days.
Returns
The stock market is always changing. It is not managed entirely by us since we are involved with multiple organizations, such as the factory and the storage. Stocks are subject to change at any moment. Be aware that your order may be out of stock after your order has been made.
Our policy is for 30 days. If you have passed 30 days in the past since you purchased however, we're unable to give you a return or exchange.
The item you purchase must be in its original packaging and not be used. It must also be returned in the original packaging.
Related products
Small Motors
Motors & Drives
Kayak Pumps
Recreational Kayaks
12V Lithium Batteries
SUP Accessory
Kayak Paddles
Apparel Accessories
Bote Accessory
Bote Accessory
Trailer Accessories
Bote Accessory
Paddle Fishing Kayaks
Uncategorized
Paddle Boards
